How big an area does the tire pyrolysis equipment occupy?

 The floor space of tire pyrolysis equipment varies depending on the size of the equipment, processing capacity and operation mode. The following are some common estimates of the floor space of tire pyrolysis equipment:

1. Small intermittent equipment: For intermittent waste tire oil refining equipment with a small processing capacity (such as 1-15 tons), the floor space is usually between 450 and 600 square meters. This type of equipment is suitable for small-scale production or experimental operations.

2. Medium-sized continuous equipment: Fully continuous waste tire oil refining equipment with a moderate processing capacity (such as 50 tons) may require a floor space of about 1,200 square meters. This type of equipment can continuously and stably process waste tires and is suitable for medium-scale production.

3. Large-scale production projects: For large-scale operations, such as waste tire oil refining projects with an annual processing capacity of 20,000 tons, the floor space of the cracking workshop itself may be expanded to 1,500 square meters. Together with storage, oil tank areas and necessary safety buffer areas, the total area is estimated to be between 2,000 and 3,000 square meters.

In addition, there are also manufacturers that provide tire pyrolysis equipment with an area of about 500 square meters (annual processing capacity of 10,000 tons), which shows that the area of the equipment is closely related to its design, production capacity and production process.

In addition to the area of the equipment, the storage place of raw materials and products also needs to be considered. A single set of main equipment may also need to be equipped with a raw material and product storage place of about 100 square meters (the specific area may vary depending on the amount of raw materials stored). If multiple sets of equipment are used for joint production, the area of a single set of land can be reduced by combining flue gas treatment and water treatment devices.

The above data is for reference only, and the actual area may vary depending on the equipment model, manufacturer design and production needs. When planning and building tire pyrolysis equipment, it is recommended to communicate in detail with Zhengzhou Dingli New Energy Equipment Co., Ltd. to ensure that the equipment can meet production needs and comply with relevant regulations. At the same time, it is also necessary to ensure that the design plan fully complies with the relevant laws and regulations of the country on fire safety, public health, good ventilation, sufficient sunshine and environmental protection. If you have any equipment needs, please feel free to contact Zhengzhou Dingli New Energy Equipment Co., Ltd.!